
Maintenance always is a difficult issue to determine products could be properly handled. If we could carefully get the essential control, it clearly will extend the lifetime of the product as well as solving lots of problems about restored, repaired, and renewed on-site.
As some special materials, we must clean regularly to maintain the products quality. However, thanks to the special physical properties of Krion® LUX solid surface:practically non-porous, and highly resistant against all types of stains and chemical subtances that make it highly easy-to-clean with only requiring minimum care.
Tips for your materials
How to clean Krion® LUX
It’s easy to keep Krion® LUX looking as good as new through cleaning marks or stains and remove any accident scratches. It can be cleaned away immediately on the surface as on the first day by following the recommended cleaning instructions. PHUC THANH AN would like to recommend how to maintain Krion® solid surface as on the first day.

I. DAILY MAINTENANCE
Although Krion® LUX is an easy-to-clean material, we need to look after it to keep it in top condition.
A little bit regularly working will keep your products to be original for a long time.
- Clean a mark or stain on your Krion® LUX solid surface before it has time to set in – that will make it easier and quicker to clean.
- All you need is a cloth, sponge or microfibre cloth to wipe the surface down daily and dispose of any easy-to-treat marks.
- For daily maintenance, cream bleach products available in department stores are recommended, or products such as CIFTM cream or VIMTM cream.
II. CLEANING COMMON STAINS
*You can get a Krion kit with extraordinary cleaning specialists and tools for cleaning and maintaining your solid surface.
Step1: Moisten a cloth and apply a mild cleaning solution – avoid anything with a strong acid-base. If you’re using the Krion cleaning kit, take the green cloth and apply the special K-CLEANER cleaner to the stain.
Step 2: Rub in a round movement, and then dry the surface with a towel.
Step 3: Once stubborn stains have been removed, carry out the daily cleaning process with a damp cloth to make the surface even.
III. CLEANING STUBBORN STAINS
*Assuming the stain perseveres, rehash with the cleaning arrangement or K-CREAM, utilizing to the point of covering a large portion of the stain.
Step 1: Moisten the green cloth and rub the surface in a circular motion without applying any pressure.
Step 2: When the stain has evaporated, clean the whole Krion® LUX solid surface with K-CREAM from the cleaning kit to give it a clean, uniform completion.
Step 3: Remove any excess cream with the green cloth and wash with water.
Step 4: it’s necessary to dry the surface well to finish off the cleaning process. Use the grey drying cloth from the Cleaning KIT to do this.
(The document is referred to: https://www.krion.com/en/news/how-to-clean-solid-surface)
For a perfect finish, always rub in circular movements and clean evenly over the whole surface. Darker colours may require more frequent attention in order to maintain a uniform finish. Avoiding hard knocks and sharp objects across the surface and consulting us for information on how to keep the Krion® LUX solid surface clean and in optimum condition.
PHUC THANH AN would like to suggest a variety of Interior Designs to decorate your home and working place. Assisting our customers to find the perfect products is our top priority.
Accessing Krion™ E-Catalogue to find more information about our products.
If you need any further information about Laminate, Compact, Solid Surface or Interior Design; please do not hesitate to Contact us.
- Email: sales@phucthanhan.com.vn
- Phone: (+84-28) 22537 555 | 22537 666
- Fax: (+84-28) 2253 7878